Checkin Conveyor
Click Here to return to Airport Page
 

Robson weigh, label and despatch conveyors can be configured in to one, two or three stage check-in arrangements.

  1. Bags are weighed/labelled and despatched on a single long weigh conveyor.

  2. Usually the weighing and labelling operations are carried out on a single conveyor, and bags despatched onto the collector from the second.

  3. Separate conveyors are used for the weighing, labelling and despatch of the bags for maximum flexibility.
 
For ease of maintenance the weigh conveyor is mounted on castors, which run in a track fixed to the top of the weigh scale. The castors enable swift replacement of the conveyor with standby units. The conveyor is easily transported to the maintenance department.  
 
The conveyor is retained in its operating position by location devices and shoot bolts. Access to the shoot bolts/power and control sockets is via a hinged plate mounted on the front of the weigh conveyor.  
 
The conveyor and casing is constructed from a 3 pressing slider bed, manufactured using 2.0mm thick satin finish stainless steel plate x240 grit finish as specified.  
 
The belt is a diamond pattern conveyor belts, vulcanised endless, will run around terminal pulleys comprising of a tail pulley with integral roller bearings running on a dead shaft and motorised drum running in mounting blocks. The conveyor tension pulley comprises a steel drum fitted with integral bearings, running on a dead shaft.  
 
Click Here to return to Airport Page
 
Geo. Robson & Co. (Conveyors) Ltd
Coleford Road, Sheffield, S9 5PA
Tel: +44 (0)114 2444221
Fax: +44 (0)114 2433066

Email info@robson.co.uk