Pusher Diverter
Click Here to return to Airport Page
 
 
  • The pusher is designed to push bags off at a maximum rate of 45 bags per minute.
  • The pusher is rigidly constructed and mounted to withstand impact from a maximum specified single bag weight at the belt speed identified.
  • The pusher is mounted on a fabricated frame complete with shock absorbing feet.
  • The pusher is deployed by a 2.2 kW geared motor unit. The output shaft of the geared motor unit is equipped with a timing belt pulley which drives a pair of drive pulleys via a timing belt tensioned by two spring loaded devices.
  • Each drive pulley is connected to a drive shaft which runs in upper and lower bearings and at the lower end connects to a pivot arm via upper and lower locking nuts.
  • The other end of each pivot arm runs in a pair of bearings mounted in the pivot arm located over a pivot pin.
  • The pivot pin is welded to the pusher arm and one pusher arm connects to the pusher blade by a metalastic bush and the other pusher arm is welded to the pusher blade.
  • The face of the pusher blade is covered with a damping/isolation pad.
  • The Horizontal Pusher is suitably guarded with both weld mesh and mild steel plate guarding as appropriate.
Click Here to return to Airport Page
Geo. Robson & Co. (Conveyors) Ltd
Coleford Road, Sheffield, S9 5PA
Tel: +44 (0)114 2444221
Fax: +44 (0)114 2433066

Email info@robson.co.uk